Message #420

Date: Mar 31 2000 16:05:02 EST
From: matthew wise <flyer_86f@yahoo.com>
Subject: Re: Replicraft Axles


A question for the bunch....

I have found a discrepency in the plans...at least I
think it is.  Somebody set me straight if I am
incorrect.  In the instructions for mounting the
H-stabs, he said that they are referenced off the hole
in the fuse, drilled for the elevator horn.  He states
that the "rear face of the H-Stab spar must be 1 inch
ahead of the center of the elevator horn hole".  In
fig 3-9 the center of this hole is 3 1/16 in. from the
aft end of the fuse and the rear face of the H-stab
spar is 3 3/4 in. leaving a difference of 11/16 in.,
not 1 inch.  Which dimension should I go by??

Matt