On Thu, 6 Apr 2000 08:42:30 -0400 (EDT), smlangford@webtv.net (stephen langford) wrote: >FlyBaby > >William, >That's a good idea about not welding on the finished V's. I will make up >a pair of V's out of plywood. >Steve Great idea, but be sure the thickness of your mock-up vees is the same as your real vees. Especially at the bottom. Otherwise your bolt holes won't line up. David E. Munday E-mail: munday@engr.uky.edu Dept. of Mechanical Engineering Web: http://www.engr.uky.edu/~munday 521 CRMS Building Voice: (606) 257-3263 University of Kentucky FAX: (606) 257-3304 Lexington, KY 40506-0108 Office: 202 D. V. Terrell Bldg.