Matt- After reading your message last night I got out my templates, I just finished rib 1 and will be working on the main ribs very soon. I measured, centerline to centerline and got 27 1/16. Are you using copies of the plan for making your templates and if so could the copier have been slightly off? -Joey matthew wise wrote: > FlyBaby > > Let me be more specific...correct Luis...the distance > between front and rear spars, centerline to > centerline, is 27 in. in Fig 4-1. When Fig 4-2A, Full > size rib drawing, is taped together, the centerline to > centerline distance between spars is 26 5/8 in. > Thanks for the response Luis. > > Matt > > > --- "MotorcycleShopper.com" <mshopper@cfl.rr.com> > wrote: > > FlyBaby > > > > At 02:43 PM 10/10/2000, you wrote: > > >FlyBaby > > > > > >I just made a startling discovery...the distance > > >between front and rear wing spars on the plan view > > is > > >27 in. On the full size wing rib drawing, the > > >distance between spars is 26 5/8 in(I have them > > taped > > >together correctly). I realized this after making > > all > > >wing rib webs per the full size drawing. Can > > anyone > > >verify this discrepancy with their drawings? Or am > > I > > >viewing this in error? Any suggestions? > > > > > >Matt > > > > If I'm reading my plans correctly, the distance > > shown on fig 4-1 is from > > and to the center of each spar. > > > > Luis Hernandez Jr. > > CEO > > Payne Corporation > > > > MotorcycleShopper.com | MotoDirectory.com | > > MotorcycleBooks.com > > MotoSalvage.com | MotoMail.com | MotoBanners.com > > | MotoClubs.com > > > > Voice (407) 860-1989 - Fax (407) 574-1014 - > > eMail: mshopper@cfl.rr.com > > > > > > > > > > >